Click pics to enlarge

We have found that the front part of the air box is the cleanest and easiest place to mount the catch can.
We have designed our lines to work with this mounting point. If you have an aftermarket CAI system which
utilizes a "heat shield" in place of the air box, you should be able to mount the catch can in the same general
location.
 
 Installation

 Start be removing the air inlet tube,  maf sensor connector and air box top/maf housing.....as seen in the pic above.

Now, remove the lower air box housing from the car, using a 10mm socket and wrench

With the box removed, take the catch can bracket and line it up on the front inner side of the box.
 (view attached pics)  Mount the bracket with the 2 provided screws.

 Reinstall the air box with the factory 10mm bolt.

Install the catch can into the bracket. Lower it enough to clear the upper air box top. Tighten the bracket screw.

Now connect the new pcv hoses to the valve cover and the supercharger. Measure and cut to fit the 3/8" ends that go the catch can and install the clamps. Reinstall the inlet tube, air box top and maf sensor connector. Double check all your connections and fittings. Your Done!

If you have any questions regarding the install, please feel free to contact us.
 We are happy to help you through the install!!